How to install a Reverse Osmosis System?

After purchase, the next step is obviously, the installation of the system. We have listed down the steps for installation and easy running of the unit.

How to install a Reverse Osmosis System?

1. Equipment checklist

Familiarize yourself with the parts, tools and procedures of installation. If any component of the system is missing, contact your customer service representative for the particular item.
ro

2. Faucet installation

Most systems are equipped with a standard faucet. Choose an appropriate location and decide whether to drill a new hole or use an existing hole for the faucet. The hole should measure 716 inches and within 1.25 inch.

Assemble the parts and slide the faucet into the hole and tighten using the pliers.

3. Drain Saddle Installation

Install the saddle onto the sink drain pipe, between the P trap and the sink. Be sure not to install it before the P trap as it may result in drain line gases escaping into the system’s drain line. It can also be installed in the lateral pipes between the two sink tubs.

Ensure that the drain fitting is on the top or to the sides of the pipe and never facing downwards. Mark the location, drill the hole, align the saddle along the holes and screw tightly in place.

4. Inlet feed valve installation

The angle stop valve connects the system to the water supply. Connect it to the cold water supply line of the existing faucet after removing the whip tube. Reconnect the whip tubing and check for any leaks by turning on both the hot and cold water supply.

5. Pressure tank installation

The tank can be installed either in upright or sideways position (a base is provided). Wrap a Teflon tape around the threaded port and connect the tank valve onto it. For effective functioning of the unit, the tank pressure should be between 5-7PSI.

6. ROS module

Using the color codes as a guideline, make the correct connections. For example the orange tube (inlet supply connection) is to be connected to the angle stop valve and to the port next to the sediment filter. Likewise, connect the blue, green and black tubes correctly.

7. Start up procedure

Place the sediment filter within the first vertical sub and the carbon filters in the other two. The membrane filter is placed into the horizontal sub on top of the bracket. Turn the angle stop valve into the “ON” position and allow the system to fill (takes 2-3 hours). Close the faucet to prevent water from draining out.

Once filled (indicated by lack of noise), open the faucet and allow the water to completely drain out. It is common to see black water due to carbon fines. Flush your system twice and the system is set up.

8. General operation

The system will automatically refill when water is used. Periodically check for the efficiency of the unit using the TDS meter. A drop in efficiency (from 80-97%) indicates a failing membrane filter. Also drain the water out to prevent staling when not regularly used.

9. System maintenance

Remember to change the carbon filters once every year. Longevity of membrane filters is only for 3-5 years. The system should be sanitized each time the filters are changed using sanitization chemicals.

How to Start a Motorcycle Rental Business

Motorcycle rental business is a very profitable enterprise, if you know how to manage it. Motorcycles are a big craze among the younger generation. They like to enjoy riding at super speeds on a motorcycle and often take part in races or camps. But most of them do not like to put up with the maintenance andMotorcycle Rental other chores that come with owning the motorcycle. I think a motorcycle rental can give you good profits. There are many motorcycle enthusiasts too who’d like to take a ride, if they happen to visit your area from far away. So you have a lucrative market here, if you play it right.

Preparatory steps

You need to be knowledgeable on the repair and maintenance of motorcycle. If you are a motorcycle rider and love riding this will be an easy job. But riding experience need not necessarily mean that you can excel in the rental service. To perform the job well, you should know anything and everything about motorcycle rental business. You can do a research online about the things that rental services offer and also try to include renting out accessories like helmet and stylish boots.

Chart a plan

Any type of business needs a plan. A blueprint in my opinion is the tool that shows to you the various aspects of the business that you earlier had not thought about, but is vital for its success. The important aspects like the capital you need, and how much you can expect as profits can be figured out. The blueprint not only helps in the set up, but also guides you when your business venture begins to roll out.
moto

Capital issues

Finance is the part where most people face a lot of hurdles. If you are opting for a loan, you need to approach a financier who can lend you the money at an affordable rate. Even if you do have the finances ready on your own, you need to decide on whether it is a wise choice.

Invest in equipment

Motorcycles need to be purchased. You should have a variety of motorcycles as the preferences of people differ. Depending on the capital you invest, you can buy the appropriate motorcycles. While buying motorcycles, you should check for the prices and quality, and ensure that they look good and impress your clients. Machines that are easy to repair and have spare parts easily available are good options.

Accessory equipment

These are as important as the motorcycles and include helmets, garage and office equipment, so your business is run efficiently and without any hitches. You can also add in accessories like racing boots. I myself prefer, best racing boots by Fox.

While you are establishing your rental business, you need to fix appropriate operation schedules. Operating hours, maintenance details, risk management and vehicle insurance are things you need to devote attention to. There are also legal as well as liability insurances in case of damages or accidents. Being familiar with the regulations in your locality will help.